The Moment in the Quiet Little Park free essay sample

Mr. Emerson Outdoor Descriptive Essay The moment in the quiet little park As I placed my heavy backpack on the old bench, I feel tiredness coming up to me, as well as the sadness, because I have to spend in the park for an hour just to write some descriptive essay. So I grabbed my pencil and notebook and started to look around, the park was lonely. The sunset was not spectacular that day. The vivid ruby and tangerine streaks that often caressed the blue brow of the sky were sleeping, There are some days when the sunlight seems to dance, to weave and frolic with tongues of fire between the blades of grass. he yellow light was sickly. It diffused softly through the gray curtains with a shrouded light that just failed to illuminate. High up in the treetops, the leaves swayed, but on the ground, the grass was silent, limp and unmoving. We will write a custom essay sample on The Moment in the Quiet Little Park or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page There was me, sitting on the bench, writing this essay. It was a quiet Tuesday late afternoon and not many people appears, I sat there alone on the ancient bench, the cold wind blew at me, and down to my spine. As I looked up In the sky, it is transformed into a colorful horizon; filled with endless streams of orange and red. The tree by my side soon gathered my interest, on the edge of the bench where I was sitting, the ancient tree sat hunched over, the gnarled, old king of a once vast domain that had long ago been turned to pasture. The great, gray knees gripped the hard Earth with a solidity of purpose that made it difficult to determine just where the tree began and the soil ended, so strong was the union of the ancient bark and grainy sustenance. Besides the ancient tree, there was an enormous baseball park; the grass is green as a precious jade. People with their pets’ plays joyfully on the grass, the enjoyment on their face are precious and reminds me the fairy tale books I use to read back in my childhood age, the quote â€Å" happily ever after â€Å"truly exist. Even I barely remember my childhood life, but after looking at toddlers walking around looking confused, that innocent little face has truly touched me. ‘Are we all like this back in our childhood’? The mysterious question suddenly appears in my head. As the sun has set and the sky has darkened like an evil spirit forcing spells to it, I stood up and walked into the sandpit that’s next to me, I can feel the soft smooth sand beneath my feet, and soon I’m taken in by the soothing atmosphere that encircles me. I close my eyes, letting myself absorb in the cool breeze on an up-coming autumn day. I am comforted by the sounds of the night wind; the rhythmic pounding of the blowing represses all of my worries. I look into the cloudless cerulean black sky and see the perfection of life. I often want to be like a bird, seemingly drifting endlessly in the wind without a care in the world. As I walked and sat on the playground swing, and now that I am relaxed, allowing myself to close my eyes and drift off for a peaceful swing, that moment was joyful. But however, that moment didn’t last long. I am soon awoken but the sounds of an owl; its big yellow eyes intimidate me, it looks like a furious predator, searching aggressively for its prey. I looked up to the sky again, searching for the wonders. I was surprised by the setting bright circular moon hangs in the sky, like a yellow balloon off in the distance, it was beautiful. The cold wind once again startled me, forcing me to leave. It was freezing as I reached into my pocket and checked my phone, the one and half has gone. So I reached my backup, plugged into my headphones, and ready to leave. I walked to the top of the front gate of the park. I was shocked by the view, the park seems to look ancient, but from the front gate view, it is beautiful. The light brightly shines on to the grass, and with the gently wind blow effect. The grass seems to be lively alive, and since I have a gentle music playing on my iPod, that moment was fantastic. It’s not only words that can describe this moment, because the scene I was looking has become way beyond its meaning. ss

Ideology and You essays

Ideology and You essays The time is nearing to cast our votes in Americas most popular election: presidency. Topics ranging from war, economy, and healthcare fill our media and flood into our living rooms. Somehow while all the ideas and opinions are thrown around us, we find a nest and settle down. In other words, we build an ideology, or set of opinions that best describe how we want our government to run. Through the years, familiar ways of thinking were grouped and given names to describe an ideology. The most predominate in the United States are liberal, conservative, libertarian, and communitarian. But how do Americans come to be part of one of these ideologies? Traditionally, the political spectrum consisted of liberal and conservative opposite points of view. They were also labeled as left and right. The left being the liberal and the right is the conservative. Naturally, citizens are most familiar with the liberal and conservative views; however the definitions of the ideologies were of extreme liberals and extreme conservatives. Most individuals agreed with some views and disagreed with others according to particular topics. This landed many Americans somewhere in the middle of the scale. As a solution, less general ideologies were introduced that described what fell between the opposite extremes, such as libertarian, and communitarian. According to idealog.org, most Americans today are labeled communitarian, which is described as being an advocate for a collective way of living (Goodman and Janda 2002). These individuals take ideas from both liberals and conservatives that mostly benefit the whole rather than themselves. Texas, on the other hand is labeled conservative. Conservatives are mostly individuals who oppose government in topics such as business and economy, however encourage government on issues that deal with lifestyles. Although conservatives dominate the south, liberals are also abundant and want more government ...

The Capitalist System and Human Greed in Wall Street (1987) Essay

The Capitalist System and Human Greed in Wall Street (1987) - Essay Example Bud becomes an insider trader and involves himself in illegal activities, so that he could give vital information to Gekko. This essay analyzes the elements that Stone used to depict the film's theme. Stone used plot, character development, and editing style to depict the theme that the capitalist system has its excesses, but individual greed is still to be predominantly blamed for the system's immoralities. The capitalist system has a propensity for greed, because of its focus on material wealth as an end itself. The capitalist focuses on material wealth as an end itself, thereby treating other human beings as means to an end. Stone's plot started with the capitalist system's external features, such as buildings and workers. He used establishing shots too in Gekko's office to demonstrate his power and wealth. His office is filled with computers and expensive furniture and painting to underline his amassed wealth as a Wall Street player. Later on, the plot builds to the climax throug h depicting the showdown between Gekko and Bud. Bud ensures that Gekko loses Bluestar to his rival Sir Lawrence Wildman (Terence Stamp). Gekko takes revenge and whistles to the police about Bud's insider trading activities. The resolution of the story says that it does not help to treat people as means to an end only. To highlight the composition and implications of the capitalist system, Stone employed both standard and non-standard editing styles. He used standard editing to show the continuity of human greed. Stone employed dissolves to establish the setting of the film, where workers are shown first and then the skyscrapers. The dissolve transitions illustrate the illusion of material wealth and how it affects workers, the main developer of capital growth. Stone also employed a long shot to establish the setting of stockbrokers in Jackson Steinem & Co., a local Wall Street stock and trading firm. Young and old stockbrokers are talking about companies and hinting on their long-st anding careers that may or may lead to financial success or not. In addition, the capitalist system teaches people to pursue materialistic goals, but they still have a choice, if they want to change the system from within. Stone uses cut-in and cut-away to demonstrate that despite people who are jam-packed in the elevator, as they are also packed into the capitalist system, they remain isolated from each other. They are isolated because of their individual goals. In addition, Stone also used deviations in editing to emphasize the theme of human greed. For instance, he used a montage to depict the differences in how Gekko treats Bud. In his office, cut-in, cut-away editing emphasized their differences in personality and social status. After investing in Bluestar and profiting for it, they meet in the restaurant and Stone uses the shot to both show them together. This time, they are â€Å"equals,† because of their parallels in human greed. The film also showed that the individu al can reinforce the excesses of the capitalist systems, in terms of pursuing relentless profit growth. The individual becomes a product and creator of the capitalist system. People like Bud become products of greed. Bud idolizes Gekko, because the latter makes tens of millions in his deals. He tells his father that there is no â€Å"

Political science Essay Example | Topics and Well Written Essays - 1250 words - 1

Political science - Essay Example The U.S. victory can be attributed to their decisive plans for naval control on the western pacific wing during the World War II. This operation was carried out with little knowledge of modern operational ideas. It is for this reason that both sides experienced tactical shortcomings that halted the entire mission and objective of the operation. This paper shall analyze the battle for Leyte Gulf with its main focus on the principles and art of military operation by the U.S. and Japan. In this regard the paper will focus on command decisions by the U.S. and Japanese naval commanders with a view of coming up with modern principles that can be applied in future operations. Principles of operation The success of any warfare mission depends solely on the ability of the commander to identify the aim, decipher the strategic factors of his operation, select and organize his forces and design a plan to achieve the objective of the operation. Normally, the commander’s role involves integ ration and coordination of an operation in a way as to inflict shock, disrupt and defeat the enemy. This is possible when the entire operation injects force on a totally different measure. In so doing, the commander ought to choose the correct course of action as dictated by ground factors by selecting factors pertinent to operations guided by the philosophy of operational art. The planning, synchronization and the conduct of operational functions have some impacts on the belligerents. This paper intends to discuss the aftereffects of the operational functions of the military in relation to planning, synchronization and execution. To achieve this aim, the impacts of the operational functions to belligerents in the Leyte Gulf operation will be discussed. The Leyte Gulf operation, also termed as the battles for Leyte Gulf, was a battle that occurred during the Second World War, from the 23rd to the 25th of October 1944. It aimed at the liberation of Philippines. Allied forces of the U .S.A and Australia and the Imperial Japanese Navy were the protagonists in the battle (Adamsky, 2010). The battle started with the invasion of Leyte’s island by the ground forces of the allied forces led by general Douglas Mac Arthur. The Japanese fleet took up the battle to defeat the invasion, but got defeated by the U.S. seventh fleet led by Vice Admiral Thomas Kinkaid and the fleet led by Admiral William. The battle got divided into four engagements which were the battle of Samar, the battle of cape Engano, the battle of Surigao strait, and the battle of the Sibuyan Sea. Preparation and Planning The main objective of the operation was to capture Leyte Gulf. The U.S. naval forces approached the attack using two axes, one under the leadership of Admiral Nimitz. This was designed to advance its operations towards a westerly strategic axis with the sole purpose of capturing the Marianas, Palau, Gilbert and Marshall Islands. The second set of forces, the southwest pacific forc es, under the command of General Douglas followed a northwesterly tactical axis all the way through Guinea and Morotai. The two axes were expected to intersect at Leyte. According to the leading commanders, the intersection would act as a stepping stone for effective takeover of Philippines. This was a strategic move in the heart of the operation as this was designed to cut off communication of Japanese sea lines disadvantaging their retaliation. In

Dry Needling in Physical Therapy Research Paper

Dry Needling in Physical Therapy - Research Paper Example Moreover, Gerwin and Dommerholt (2006) state that DN is not considered as a precise approach and is not suitable for every patient. There has always been a debate whether or not DN should be considered a part of acupuncture which is based on traditional Chinese medicine. According to Amaro (2007), DN techniques are performed â€Å"with the same solid filament needles acupuncture practitioners are using, but dry needling does not require knowledge of the theoretical foundations of acupuncture†. Dommerholt et al. (2006) state that some countries accept in their policy that IMS falls within the scope of physical therapy while others do not. According to them, the DN techniques include different models such as the radiculopathy model, the trigger point (TrP) model, and the spinal segmental sensitization (SSS) model. Superficial DN works under TrP model; deep DN needs both TrP and radiculopathy models; while, injection therapy works under TrP and SSS models. Radiculopathy model. The radiculopathy model was first put forth by Dr. Chan Gunn and is based on Cannon and Rosenblueth’s Law of Denervation. According to this model, it is always the peripheral neuropathy or radiculopathy that causes the myofacial pain syndrome (MPS). If there is a free flow of nerve impulses, the innervated structures function correctly, otherwise these innervated structures become supersensitive. According to this model, the best treatment points are located near the motor muscles. This model always remained limited to the hypothetical stage. According to Dr. Chan Gun’s research (as cited in Dommerholt et al., 2006): Relative minor injuries would not result in chronic pain without prior sensitization of the nerve root is inconsistent with many current neurophysiological studies that confirm that persistent and even relatively brief nociceptive input can result in pain-producing plastic dorsal horn changes. Trigger point model. This model basically deals with MTrPS.

Continuous Flow in Lean Manufacturing

Continuous Flow in Lean Manufacturing Continous Flow In the majority of the lean manufacturing production systems, a U-shaped workcell is used.   This is because with a worker positioned in the interior of the U, one would save time by minimising movement of both the parts and of the worker by simply turning around and sending it to the next work station. In the case of very heavy parts,   mechanised conveyor belts are usually added to help the parts along from one value adding process to the next at a constant rate, however it is to be noted that manual push or gavity conveyors are the ideal method for moving parts, as their reliability is very high and their down times are low owing to their lack of complexity in their design. The corners of this workcell can cause alot of problems, as they have a tendency to slow down the production rates by holding some parts in that possible dead space.   For this reason, a ball roller transfer section is generally used to combat the dead space areas around the corners of the system. There may some instances where non-cyclical work has to be done to a part.   If this were to be passed through the system like normal, it would cause disruptions to the system.   To fix this problem, these operations are done outside the cell by support workers. Simplicity To cater for continuous-flow, one-at-a-time manufacturing each work station is made as compact as possible to reduce the waste of space, as well as to reduce possible storing space of parts and sub-assemblies, making batched processes imposible in this confiuration whilst also eliminating useless steps by the worker whilst in operation. To reduce the ammount of   floor space used, one must avoid standardised machines and instead specially designed machine bases must be used.   It is important to note that each machine base can vary from workstation to workstation to further optimise assembly subprocesses.   For the sake of convienience, modularity and cost, extruded aluminium members are bolted together to form the above mentioned machine bases.   Another essential reason   why the above set up is very effective is that due to its flexibility, it allows for quick and continuous improvements, which therefore directly impacts the set up time of the machine. Workplace Organization To ensure that no time is wasted looking for misplaced tools, all tools used at a work station has its own designated toolholder.   This would ensure the immediate detection of a displaced tool.   To further improve on this idea, some plants use modular tools holders to add more flexibility to the work station and therefore increasing the utility of the said workstation. Another trick used to reduce the downtime is to have backup tools available to the worker, but also out of their way   until they are required.   To this end, many companies tend to use tool holding structures that can be swung or slid into or out of the workspace with little to no effort required. So as to help the workers make fast decisions and to put them into effect, an information board is used.   The information board is a simple way of supplying relevant information at the workplace with anything from assembly processes, to production targets.   This feature takes out the need to chase down a busy supervisor, thus dramatically reducing the production downtime.   So as to increase its flexibility in the workplace and reduce waste, it is generally modular and reusable. Parts Presentation To reduce the number of interruptions to a minimum, all parts are generally supplied to each workstation outside of the workcell via gravity feed bins.   These bins are designed with simplicity and high reliability in mind to reduce the down times of the production line.   To make the bins even more flexible, they are usually designed to be stackable and to be fastened using key studs, thus further increasing the reconfigurability of the production line. In the case of larger parts however, the above system is shunned and a system of gravity feed conveyors are used instead.   On the other hand when parts are very heavy, a case lifter is used to raise the parts to the work station using electricity, pneumatics, or hydraulics. Reconfigurability To reduce the time wasted in the setting up of the line, reconfigurability is a very important factor to take in account when designing a workcell.   In light of this, quick-change fixtures are used due to their rapid changeover process.   Another perk of using this type of fixture is that since it is very compact, many fixtures can be stored at the workstation, further shortening of the changeover time is experienced. This arrangement allows for quick reconfiguration and movement to different parts of the workcell to accomodate for a new product, whilst also facilitating the change of the machine or workstation by using lockable casters. Quality One of the advantages of one-at-a-time manufacturing is the fact that a visual inspection can be done for every assembly.   In the case that gages are required, they would be mounted to the workstation while still allowing for quick and easy replacement. Some of the quality problems encountered may come from a malfuntioning machine or a faulty process.   These problems can be quickly solved be restructuring the machine frame system via the replavement of the bolted members. In the case of a faulty machine, this can also be quickly fixed, by first disconnecting all of the pneumatic or electric lines and then disconnecting the said machine to the frame via the lockable casters, eliminating the reluctance to change and improve the machines.   This in turn increases the quality of the assembly appreciably by not allowing anyone to settle for a part that is almost right. Maintainability So as to drastically reduce down times due to maintainance, a modular structural framing system is used.   This is to ensure that whilst the machine, or the machine frame is being serviced, another can easily take its place, minimising the already small downtime   of the reconfigureable defective part in question. By using this approach, one can standardize the components for most of the machine bases, guards, and workstations.   This significantly reduces the number of tools needed   to maintain the work cell, which in turn reduces the time needed to maintain the said structures.   It is also important to note that since most of the parts are standardised, the company needs less inventory space to house the spare parts needed for maintainance. Ease of Access By using aluminium framing system discussed above, all components can be easily accessed and the positions of the various accessories such as the bins, shelves and tool holders can be optimised to increase efficiency. Another advantage of using the above system is that not only is it possible to insure accessability for every worker by adding and repositioning components, but it also greatly increases the ease of maintainance of the work station by removing the parts in question via simple hand tools.

My Personal Philosophy of Education Essay examples -- Educational Educ

Philosophy of Education Becoming a teacher is going to be one of the greatest accomplishments of my life. Teaching was never a childhood dream for me like it was with others. Some people have always known that they wanted to become some type of teacher, but I never decided to until I entered college. I’ve always loved being around children and it makes me feel great to be able to help someone, so becoming a teacher is the perfect career choice for me. I believe that the true nature of most students is that they like school and they want to learn. I also believe that the school and the teachers greatly influence their nature over the course of their schooling. I believe that this true nature changes for a lot of students because at some point they go to a school that they don’t like or they have a teacher who is mean to them and expects them to do everything on their own without any guidance or help. I’ve had teachers like his and they made me dislike school very quickly. Hopefully, if this is the case, they will eventually have a great teacher that inspires them to do well and to like school once again. I want to be that teacher. In my opinion, the nature of knowledge is relative or constructed. Every person has their own set of opinions and beliefs that determine what that person perceives as the truth. Most people believe that their ideas, opinions, and beliefs of something are the truth to them. It’s my belief that the overall purpose of education is to improve society as a whole. Everyone should be given an equal opportunity to learn as they mature. I believe that the more educated a person is then the more likely they can become successful. A society full of successful people will be a successful society. Educat... ...ts will quickly lose interest. My professional development plan is to begin my career by substitute teaching after graduation. I do not want to relocate far from my current residence but I’m not completely opposed to it if the right opportunity presents itself. I will continue to substitute until I can find a full-time position. I do want to return to school to get a master’s degree after I have received some experience in the field or I am able to secure a full-time teaching position. There are a lot of different professional groups to join in the fields of physical education, health education, and teacher education. At this time I have not decided on which groups I will join in the future but I do plan to be active in a few of them. I also plan to be very active in the community that I will be teaching in. I feel that this is very important for all teachers.